Telekommunikasiekabels

» Telekommunikasiekabels

1-1/4″ 5/4″ RF Coaxial Cable for Telecom with High Expansion

Plek van oorsprong:	Guangdong, Sjina
Handelsnaam:	SOGOO
Sertifisering:	DIT, RoHS

Minimum bestelhoeveelheid:	1000m
Prys:	5.4~7 USD
Verpakkingsbesonderhede:	500m per wooden drum
Afleweringstyd:	7-10 werksdae
Betalingsvoorwaardes:	T / T; Paypal; Westerse Unie
voorsieningsvermoë:	20000m per week

navraag

Spesifikasies

1-1/4″ 5/4″ RF Coaxial Cable for Telecom with High Expansion

1-1/4″ RF-voerkabel / Corrugated Cable/ Andrew Heliax Cable 1/2″ RF feeder cable, 50Ohm, also be named as half inch coaxial cable, has pretty good performances, wish loss, great attenuation and PIM. Its assemblies usually fixed with N type connectors. This 1/2″ RF feeder cable and its assemblies are largely used on various antennas, cellphone/mobile phone signal boosters, repeaters. It’s also suitable for GSM,CDMA ,PHS ,TD-SCDMA ,CDMA2000 and WCDMA and etc.

Toepassing
Widely used in wireless communication base station.

RF Feeder Cable 1-1/4” Construction

Material

Diameter(mm)

Inner Conductor

Dielectric

First Shield

Baadjie

Copper Tube

Foam PE

Corrugated Bare Copper Tube

PE or LSZH

13.0

32.0

35.8

38.7

Electrical Characteristics

Nominal Capacitance (pF/m)

Impedance (Ω)

Velocity Ratio

DC Resistance inner Conductor(Ω/KM)

DC Resistance outer Conductor(Ω/KM)

Werkstemperatuur

Min. Bending Radius(Single)

Min. Bending Radius(Repeated)

0.78

0.66

-50℃ to +85℃

70mm

200mm

Related Feeder cables:

Cable	Inner Conductor		Insulation		Outer Conductor		Baadjie
Tik	Material	Grootte	Material	Dia.	Material	Dia.	Material	Dia.
1/4” S	CCA	1.90±0.03	FPE	5.0±0.1	CU	6.4±0.15	LLDPE	7.8±0.3
3/8”	CCA	2.60±0.05	FPE	7.0±0.2	CU	9.0±0.15	LLDPE	10.4±0.2
1/2 S	CCA	3.6±0.05	FPE	9.0±0.2	CU	12.2±0.15	LLDPE	13.6±0.2
1/2”	CCA	4.80±0.05	FPE	12.2±0.2	CU	13.8±0.15	LLDPE	15.7±0.2
5/8”	CCA	7.05±0.05	FPE	18.3±0.2	CU	19.8±0.3	LLDPE	22.2±0.3
7/8”	CU	9.0±0.05	FPE	22.4±0.3	CU	24.9±0.20	LLDPE	27.0±0.25
7/8” S	CU	9.40±0.10	FPE	22.8±0.25	CU	25.3±0.25	LLDPE	27.5±0.25
1-1/4”	CU	13.1±0.10	FPE	32.5±0.25	CU	35.8±0.30	LLDPE	38.8±0.30
1-5/8”	CU	17.3±0.20	FPE	42.7±0.30	CU	46.5±0.30	LLDPE	49.6±0.30

Electrical Characteristics

Cable	DC Resistance ≤ (Ω/km) @ 20.C		Capacitance	Velocity Raio	Attenuation & 20.C dB/100m) Maks
Tik	Inner Conductor	Outer Conductor	(pF/m)	(%)	100MHz	800MHz	1000MHz	3000MHz
1/4” S	9.8	6.5	79	84	5.89	17.4	19.6	35.6
3/8”	3.48	2.85	75	88	3.42	10.2	11.6	21.4
1/2” S	2.69	3.28	82	88	3.41	10.4	11.8	22.4
1/2”	1.48	1.9	76	84	2.17	6.46	7.28	13.4
5/8”	0.49	1.37	76	89	1.55	5.07	5.38	10.2
7/8”	1.05	1.18	75	75	1.19	3.88	4.12	7.76
7/8” S	2.7	1.19	74	74	1.3	4.22	4.46	9.35
1-1/4”	0.72	0.62	75	75	0.83	2.59	2.94	5.68
1-5/8”	0.83	0.52	75	75	0.67	2.29	2.43	/